WAP 321 continues disconnections, reason 1 or 2 or 3 or 4 or 6 or 7 or 8
I have a Cisco wap 321 -E-K9 V01 firmware version 184.108.40.206.
I am using it as repeater, it connect wireless to another Cisco wap121 which is not very far away from wap321 . Most of the time the wap321 lose the connection and come back again itself after some minutes.
The log during the disconnection show many type of errors which are not clear what is the problem.
I uploaded the logs before and after the disconnection .
Also I know that it has old version of firmware but I don't believe it will fix the problem because I read some cases with same problem with new firmware.
Configure Client QoS MAC Class Map on the WAP125 or WAP581
The Quality of Service (QoS) feature on the WAP125 or WAP581 access points contain Differentiated Services (DiffServ) support that allows you to classify and man...
Configure Packet Capture on a WAP125 or WAP581 Access Point
The Packet Capture feature enables capturing and storing packets received and transmitted by the Wireless Access Point (WAP). The captured packets can then be anal...
Configuring WPA-PSK Complexity on the WAP131, WAP351, and WAP371
When a VAP (Virtual Access Point) is configured, there are several options available for securely authenticating clients. If WPA Personal is selected (also kn...