I'm running into a problem with my WAP321. I have two if them onsite for a client and one is working perfect. Just finished upgrading the firmware and it came back to life.
The other one I use for the poffice upgraded to 18.104.22.168 without a problem but it took three times the amount of time to reboot and update as the other one and the wireless signal still fluctuates wildly while in use.
I'm suspecting the hardware itself but if someone has had this happen to them and they were able to quickly resolve it, I'd love to know.
Could be a problem related to wireless interference. You could check then administration web page to see if the firmware upgrade went well. Also the wireless statistics might show some hints of what the problem is.
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...