WAP200 looses wifi connectivity in irregular intervals
We currently have ~15 WAP200 accesspoints distributed over 4 buildings. Random devices seem to go unresponsive at irregular intervals (web interface still works, clients see a signal, but cannot connect). Rebooting the device solves the problem. User authtication is solved via a radius backend (freeradius), although I highly doubt this is causing the problem since the radius server does not recieve any requests from "broken" accesspoints.
Configuration is WPA2 - Enterprise, only 1 SSID, Power is via PoE
Unfortunately it isn't possible to reliably reproduce the problem. Anyone else having this problem?
Re: WAP200 looses wifi connectivity in irregular intervals
Yes, I have only one WAP200E (with PoE) and it pressents the same issue. I have it configured with open security, 1 SSID, I mean with the simpliest configuration and it still looses wifi connectivity. It presents the same sintoms:
web interface still works, clients see a signal, but cannot connect
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...