cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
568
Views
0
Helpful
1
Replies

WAP321 NOT WORKING IN GUEST NETWORK

Hello,

I'm using a WAP321 in my network, this have 2 SSIDs. The WAP321 is attached for switch Cisco WS-C3750X-24P-S with configuration port below. First SSID is Corp in corporate network, vlan 11, network 172.30.11.x/24 working normally no have problem, but second SSID is Corp-Guest in guest network, vlan 200, network 192.168.0.x/24 in this is network I have problem, dont get IP Address and no get out internet. In WAP321 I have two VID. For guest network I have a provider Internet access in vlan 200, configuration port below too.

 

I HAVE HELP.

REGARDS,

ANDERSON BORGES

 

interface GigabitEthernet1/0/17
description Conected Internet provider
switchport access vlan 200
switchport mode access
 
interface GigabitEthernet1/48
description Conected WAP321
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 11, 200
switchport mode trunk
 
 
1 Reply 1

Saurav Lodh
Level 7
Level 7

refer

http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap121/administration/guide/WAP121_321_AG_en.pdf

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: