Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
I was just made aware of your post that had not been answered. I am sorry for that.
Currently the WAP121/321 can only repeat with another WAP121/321 respectively. I am attaching the Admin Guide for this product and if you check Chapter 5 under WDS Bridge it walks through setting this up. If after trying this, you have any issues please let me know.
My name is Isabelle Hannich and I work as a Technical Writer for Cisco Small Business. In addition to the Administration Guide that Eric attached, you can view a short video on configuring bridging on the WAP121 and WAP321. The video is found here:
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...