Hi. Having a problem getting WAP4410 working using RADIUS authentication for security. We have it configured for RADIUS for connection control as well as security. It passes the connection control - I can see the everything passes there in the RADIUS log. Then it fails when it trying to go to the RADIUS for security authentication. In fact the RADIUS doesn't ever get the request. The clients just report back that the RADIUS server is unreachable or that it is not configured for the type of specified Authentication. But there is no failure in the RADIUS log! The RADIUS never gets the request. Once in a while If do a repair on the Wireless adapter it seems to work (other times not). This happens with multiple adapter types (Many different Intel varieties, Broadcom as well) on many different laptops (Lenovo Thinkpad T410, T60, T43, Dell Latitude D830, D610 etc).
WAP4410 is at the lates FW revision 188.8.131.52 and latest HW V02
Article ID:5727 Configure the Single Point Setup on the WAP581 Objective
A Wireless Access Point (WAP) connects to a router and serves as a node
to the Wireless Local Area Network (WLAN). Clustering is when multiple
WAPs are joined on the same network. Th...
Article ID:5706 Upgrade the Firmware on the WAP125 Objective New
firmware releases are improvements from previous firmware versions.
Network device performance can be enhanced when an upgrade is made.
Firmware files can be downloaded through: Trivial File...
Article ID:1972 Configure Time Settings on a Wireless Access Point
Objective The system clock provides a network-synchronized time-stamping
service for software events such as message logs. Without synchronized
time, accurate correlation of log files betw...