Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WAP4410N Local Mesh

We have installed Three WAP4410N in a G+1 Villa (Two in Ground Flooor and One in First Floor) to cover the entire villa with wifi network. We created Two SSID (DATA and VOICE). The SSID DATA is Visiable to all and SSID VOICE is HIDDEN. We connect Four SIP WIFI Phones (WIP310G2) to SSID VOICE and SIP Phones are register to AVAYA IP OFFICE PABX as SIP Extension. When the people are moving around in the WIFI Area with the phone conversion is disconnect while switching between AP's.  I already set all the access point with same SSID (DATA and VOICE) with same Security WPA - TKIP and same Passcode. But When the SIP phone users are move around with a Conversion thru SIP Phone. the call is disconnected. I use Different Channels for the Three AP's as channel 1, 6 and 11. Please guide me to setup the AP's (WAP4410N) to work as a WIFI Local Mesh for Both SSID's Regards Saleem