Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WAP4410N mode AP with WDS

I have 4 WAP4410N mode AP with WDS. 

WAP4410N drop the connection, and traffic on LAN is abnormal - sometimes overwhelm all LAN
Also communication betweene APs in WDS hang.

I try

Regards firmware 2.0.7 and also 2.0.6  - is the same !
Jaro

en → sk
firmware
podstatné meno: mikroprogramové vybavenie
2 REPLIES
Gold

WAP4410N mode AP with WDS

Jaroslav,

If the LAN port is connected to a 10/100 port, please reduce the LAN port on the WAP4410N to 10/100 as well so it will negotiate properly. Regarding the WDS issue, are there interfering networks in the area?

- Marty

New Member

Hi,The problem is, that first

Hi,
The problem is, that first AP loop with the last AP. Solution is - configure APs to "cascade" :-)
In first AP in the WDS give address to second, in the secon AP in the WDS give address firts and third, ...

Then the last will not loop with the first, ...
For me this was the solution 

Regards
Jaro

390
Views
0
Helpful
2
Replies
CreatePlease to create content