Can you kindly help me i have a switch 3750 with wlan 2100 but both the switch are not comminicating. i.e they are not ping each other but they can see thereself and their ip addr.( the switch can not ping the management interface of the controller niether the controller can ping the switch.).
Thanks for posting. Since this is not a small business product, I suggest posting this question in the Cisco NetPro Community http://forum.cisco.com/eforum/servlet/NetProf?page=main for input from appropriate subject matter experts. NetPro is a peer and expert forum where you can get suggestions and information from networking professionals on a variety of solutions and technologies.
Let me know if you have any questions.
Cisco Small Business
Support Community Manager
If my response answered your question, please mark the response as answered. Thank you!
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...