WLC526 and two AP521 problem. Clients keep loose connectivity
I have a UC520 in a building with several IP phones. We installed a WLC526 and two AP521's for seamless roaming of cordless phones. THe phones work great with no issues. When I am running a ping test on a wireless laptop, i keep loosing packets. It looses connectivity randomnly. DHCP is given via Windows 2008R2 server. Have a cisco 2948 switch also in the mix. THe AP's are connected directly to teh front of the UC520. Is there something in the configuration I am missing? Why do phones work perfectly and not data?
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...
Hi Everyone!!!.Here I leave a few tips to improve your wireless network,
they are short tips that can implement in your home or businessIf the
Windows operating system ever notifies you about a weak Wi-Fi signal, it
probably means that your connection isn...