it will be great if someone will help me with my problem.
the problem is : our wrvs4400n wifi router configuration.
network description: we need 2 separated wifi networks one for guests and one for internal access, and i configured them on router, and also configured each one of them to different vlan, guests to vlan 200 and internal use default vlan 1.
vlan 1 configured as dhcp relay and its working pritty well.
vlan 200 configured as dhcp and the problem begins here.
somehow on vlan 200 i get dhcp from our externam dhcp server,
wrvs4400n conected as follow> lan port1/vlan 200 connected to firewall port(configured as vlan 200) and lan port 4/vlan1 conected to our main switch wich connected to firewall also.
i guess that my knowlege in networking its not so good......
how can i prevent from our internal dhcp to comunicate with vlan 200 ,
Article ID:5727 Configure the Single Point Setup on the WAP581 Objective
A Wireless Access Point (WAP) connects to a router and serves as a node
to the Wireless Local Area Network (WLAN). Clustering is when multiple
WAPs are joined on the same network. Th...
Article ID:5706 Upgrade the Firmware on the WAP125 Objective New
firmware releases are improvements from previous firmware versions.
Network device performance can be enhanced when an upgrade is made.
Firmware files can be downloaded through: Trivial File...
Article ID:1972 Configure Time Settings on a Wireless Access Point
Objective The system clock provides a network-synchronized time-stamping
service for software events such as message logs. Without synchronized
time, accurate correlation of log files betw...