Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

minimal requirement to use SCH

Hi all,

we have some CISO devices bought from VCE.

We registered our CISCO account within some CISCO contract numbers provided by VCE.

Looking at these contracts appears that we have S/W Download=0 Access Level=2 Case management=0

Is that sufficient to manage SCH platform?

I suspect we need more access privileges because when I go to

https://tools.cisco.com/sch/ and try to access to registration Management I got an errore which says: "

Access Denied

Your current role does not have sufficient privileges to access this page"

Thank You

Regards

Mauro

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

minimal requirement to use SCH

If your devices registered successfully, then the devices are under contract and functioning correctly in the Smart Call Home web site.

For individuals to view the devices on the Smart Call Home web portal, Their CCO ID must be associated with the contract the devices are registered under to see the devices in the Smart Call Home web portal.

But the Smart Call Home portal checks several things for user access:

     1. Does the CCO id exist

     2. Is the user associated with a valid Smartnet contract

     3. Does the CCO ID have "admin role" privileges for this contract in the Smart Call Home web portal

If all of these conditions are met, then there are also issues that were brought to light recently for case sensitive Cisco.com user ID (CCO IDs) such as

CSCtt03106Using alphanumeric and mixed case letters as CCOID's in SCH

which automatically failed the user with the message you described.

For fastest resolution, open a Tac case using Technology: Smart Services, subtechnology:Device Diagnostics. The TAC engineer will be able to validate that your CCO ID meets the required conditions for access and if you are affected by the bug mentioned above.

1 REPLY
Cisco Employee

minimal requirement to use SCH

If your devices registered successfully, then the devices are under contract and functioning correctly in the Smart Call Home web site.

For individuals to view the devices on the Smart Call Home web portal, Their CCO ID must be associated with the contract the devices are registered under to see the devices in the Smart Call Home web portal.

But the Smart Call Home portal checks several things for user access:

     1. Does the CCO id exist

     2. Is the user associated with a valid Smartnet contract

     3. Does the CCO ID have "admin role" privileges for this contract in the Smart Call Home web portal

If all of these conditions are met, then there are also issues that were brought to light recently for case sensitive Cisco.com user ID (CCO IDs) such as

CSCtt03106Using alphanumeric and mixed case letters as CCOID's in SCH

which automatically failed the user with the message you described.

For fastest resolution, open a Tac case using Technology: Smart Services, subtechnology:Device Diagnostics. The TAC engineer will be able to validate that your CCO ID meets the required conditions for access and if you are affected by the bug mentioned above.

4048
Views
0
Helpful
1
Replies