Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Licensing and Smartnet on WS-SVC-WISM2-K-K9

Hi all
I have a question regarding licensing/Smartnet for WS-SVC-WISM2-K-K9 card

I was told , in order to register additional licenses for WS-SVC-WISM2-K-K9 , you need to use the SN# of the chassis where card will be installed. Is that correct ?

How can i move my WS-SVC-WISM2-K-K9 around without force to move my chassis , if it is tied with the chassis ?

I have also noticed some SmartNet pricing for just WS-SVC-WISM2-K-K9 , or combo of chassis , supervisor and WS-SVC-WISM2-K-K9

Your help will be highly appreciated 

Thanks in advance 

3 REPLIES
Hall of Fame Super Gold

If you have to RMA your WiSM

If you have to RMA your WiSM-2 card, you need to furnish the serial number of the 6500/6800 chassis. 

 

You can move the WiSM-2 into different chassis as long as the chassis is covered under SmartNet.

New Member

Thank you for your answer

Thank you for your answer  Leo, 

Then best option is to SmartNet both chassis and linecard ( for free  IOS updates ) in case of failure of either, instead of just purchasing for WISM-2

 

Hall of Fame Super Gold

Then best option is to

Then best option is to SmartNet both chassis and linecard (for free  IOS updates) in case of failure of either, instead of just purchasing for WISM-2.

Yes.

116
Views
5
Helpful
3
Replies
CreatePlease to create content