Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PBR working but no internet

I have a cisco 4507 PBR configured; there are two vlans A & B and two uplinks A' and B' to Firewall ; packets from vlan can reach firewall but no internet is coming; once default route is given it starts working.

I want each vlan's traffic should routed through its corresponding uplink

1 REPLY
New Member

Hi Dear,You wrote " cisco

Hi Dear,

You wrote " cisco 4507 PBR configured " but as per your question it seems that PBR is not configured or may configured but not working. Please share your configuration that will create better understanding to sort-out the issue. Before you share config I have some example similer to you requirment, please match your configuration with below example, I hope it will help you:

access-list 101 permit ip x.x.x.x
access-list 102 permit ip y.y.y.y

route-map PBR-Pri permit 10
match ip address 101
set ip next-hop (prmary link)

route-map PBR-Sec permit 10
match ip address 102
set ip next-hop (Secondary link)

interface fa 1/0
description *** VLAN 1 ****
ip address x.x.x.x 255.255.255.x
ip policy route-map PBR-Pri

interface fa 1/1
description *** VLAN 2 ****
ip address x.x.x.x 255.255.255.x
ip policy route-map PBR-Sec

 

Always rate helpfull posts.

Sajid Ali Pathan

 

56
Views
0
Helpful
1
Replies