Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

[Cisco FAQ] - Can you see Serial Number for Netcrypt from telnet connection?

If yes, then where can I see it?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Can you see Serial Number for Netcrypt from telnet connection?

You can get the Netcrypt Serial Number through telnet connection by using the command 'e2prom_settings',  then use a 0 to exit the command. 
The command provide a long list of item with Netcrypt information, you can see that item 21 has the Hardware Version.  And inside that line of data you see D9671-1Axxxxxxx000... with Model number D9671-1A then serial number where the x's are.

1 REPLY
Cisco Employee

Can you see Serial Number for Netcrypt from telnet connection?

You can get the Netcrypt Serial Number through telnet connection by using the command 'e2prom_settings',  then use a 0 to exit the command. 
The command provide a long list of item with Netcrypt information, you can see that item 21 has the Hardware Version.  And inside that line of data you see D9671-1Axxxxxxx000... with Model number D9671-1A then serial number where the x's are.

419
Views
5
Helpful
1
Replies