Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

[Cisco FAQ] - Do I load new CODE and LICENSES to the RFGW1?

I would like to know where I can find the latest code

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

do I load new CODE and LICENSES to the RFGW1?

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page.  Click "show FTP settings".

1 REPLY
New Member

do I load new CODE and LICENSES to the RFGW1?

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page.  Click "show FTP settings".

352
Views
5
Helpful
1
Replies
CreatePlease login to create content