D9854 still HD-SDI sync output with no proper services input ASI
Which output are you looking at? If you are looking at the analog video out, you should be able to drop the Vsync under an alarm condition. From a web browser, go to System Settings - Alarms - Setup. ENABLE the 'Enable Video Cutoff on Alarm Condition' option.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...