Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Does anyone have some documentation of UBR10-PRE5?

Hello everybody,

As my attention, I found there was a upgrade of UBR10012 that PRE5 has coming.

I want to know some detail information of PRE5.

Does anyone have some documentation or PPT of UBR10-PRE5?

Please share it with me......

Thank you.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re:Does anyone have some documentation of UBR10-PRE5?

There are 8 10G sfp+ ports on the PRE5. 4 can be used as uplinks, making space for the new 3G-SPA in the SIP-600, and 4 can be used as cross connect to a secondary PRE for redundancy.

Sent from Cisco Technical Support Android App

10 REPLIES
New Member

Does anyone have some documentation of UBR10-PRE5?

New Member

Does anyone have some documentation of UBR10-PRE5?

Thank you for your answer...Ivan.

I had read that document and datasheet of PRE5 before.

Is the board-to-board port function is make connection between two PRE5?

Is the board-to-board port can be able to a uplink port?

New Member

Re:Does anyone have some documentation of UBR10-PRE5?

There are 8 10G sfp+ ports on the PRE5. 4 can be used as uplinks, making space for the new 3G-SPA in the SIP-600, and 4 can be used as cross connect to a secondary PRE for redundancy.

Sent from Cisco Technical Support Android App

New Member

Does anyone have some documentation of UBR10-PRE5?

Hi all ,

Does anyone know if can old power supply UBR10-PWR-AC work with PRE5 ?

I have  4x 3g60 and 2x PRE4 , and want to change to PRE5 .

Thanks 

New Member

Does anyone have some documentation of UBR10-PRE5?

Hi Startx001,

You can check use command show environment and look your power consumption. If it's less than 2400 W *please note, your power will be average if you have 2 UBR10-PWR-AC.

Make sure if you sum Power A and B will be less than 2400 W.

If it's more than 2400W, please replace with UBR10-PWR-AC-plus to make sure the redundancy works.

New Member

Re: Does anyone have some documentation of UBR10-PRE5?

So it will works with  UBR10-PWR-AC and  power consumption will be splited across two of them?

I have two  UBR10-PWR-AC.

Any Cisco documents about that ?

BR

VZ

New Member

Does anyone have some documentation of UBR10-PRE5?

Yes, it works.

It will split. 2 when you have 2, but remember, it is a rendundacy power module. So, you should aware when 1 power had a problem.

But, if you had full card, i think you will have power consumtion more than 2400 W. Last month, I upgraded

UBR10-PWR-AC to UBR10-PWR-AC-plus in a CMTS box that use PRE5

New Member

Re: Does anyone have some documentation of UBR10-PRE5?

Hi,

Thank a lot. Just one more question if you remember . How much  power consumption you had when you inserted PRE5 with  UBR10-PWR-AC and what/how much cards you have ?

Thanks

VZ

New Member

Does anyone have some documentation of UBR10-PRE5?

Hi,

When I use PRE5 (2 Unit), MC20x20 8 Cards, 1 unit SPA-UBR10-DS-HD, and 2 units SPA-5x1. The consumstion is about 2600 W.



New Member

Re: Does anyone have some documentation of UBR10-PRE5?

Hi,

As I attention, the max power of PRE4 and PRE5 are 210W and 248W respectively.

So from your environment I think the old power supply can support upgrade.

But please see datasheet of PRE5, there have some hardware requirements.

First of all is newer power supply which are UBR10-PWR-ACPLUS and UBR10-PWR-DC-PLUS.

http://www.cisco.com/en/US/prod/collateral/video/ps8806/ps5684/ps2209/data_sheet_c78-728258.html

772
Views
0
Helpful
10
Replies