Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Inlet 8100 Upgrade to 7.x firmware

Hi,

We have some Inlet 8100s that we use for HLS. We want to try the new H.264 codec that was released with the 7.x software. We have Smartnet so we can download the software. However it also seems to need a license code. Anyone know where to get it? Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Inlet 8100 Upgrade to 7.x firmware

Hello Peter,

The PID is L-SPN-H264-LIC-U 

In order to receive an evaul you will need to contact Scott Meek, he is the Product Manager and can assist you.  His e-mail is scmeek@cisco.com

Regards,

Justin

5 REPLIES
Cisco Employee

Inlet 8100 Upgrade to 7.x firmware

Hello P.Carroll,

The updated license will need to be purchased through your sales contact or a 3rd party vendor.  If you do not have access to either of these please let me know.

Regards,

Justin

New Member

Inlet 8100 Upgrade to 7.x firmware

Thanks Justin

Two questions

1. Whats the part number for the license

2. Is it possible to get a license on eval as we would need to see what it gives us before buying licenses

Peter

Cisco Employee

Re: Inlet 8100 Upgrade to 7.x firmware

Hello Peter,

The PID is L-SPN-H264-LIC-U 

In order to receive an evaul you will need to contact Scott Meek, he is the Product Manager and can assist you.  His e-mail is scmeek@cisco.com

Regards,

Justin

New Member

Re: Inlet 8100 Upgrade to 7.x firmware

Thanks Justin. Much appreciated

New Member

who is the new Product

who is the new Product Manager?

553
Views
0
Helpful
5
Replies
CreatePlease to create content