Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACS5.3 and cisco nms 9000 san switches

Hi All

I need to get the nms 9000  to work with the new ACS 5.3.

Looking at the existing ACS 4.0 we have the following attribute set -

cisco-av-pair=shell:roles*"network-admin"

and looking at the below i think we need to have this set somewhere

in order for the ACS to work with the MDS 9000 -

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_2_x/fm/configuration/guide/radius.html

However how do i put this into the new ACS 5.3

I can put it in like this -

Attrbute              requirement                       value

shell:roles          mandatory                         network-admin

or do i put it in like this -

cisco-av-pair=shell:roles   mandatory            network-admin

Anyone any ideas ?

Steve

366
Views
0
Helpful
0
Replies