I have a storage port connection for an IBM XIV storage subsystem that is showing up in Fabric Manager as a host and not storage. Is there a way to change this so the port will show up as a target and not an initiator?
I am getting this error message when I try to connect to the fabic. I get the same message when I launch the SAN client or when I try to add the device in web console. I am not sure what is causing this problem. Please help.
I have a question for folks. I'm getting the following error N5k-1(config)# interface san-port-channel 20 N5k-1(config-if)# sw mode ferror: incompatible port mode config type (0x40290027) I tried to set "F" because f1/43, f1/44 are facing to Storage ...
CAn anybody advise how to configure MDS switch to get CLI logons/Actions logged on external syslog server.I have tried logging server x.x.x.x facility user and logging server x.x.x.x facility authpriv without success.Please advise if there is a confi...
helloCustomer reported these error messages on 2X Mds9124ereproducible every 28minutes, even if MDS system message and recoverysay no action (below extract)how to fix this issue because syslog files and log files are full rapidlythanks in advanceJYPE...
Hi.I need a help about upgrade the image. It's the first time I do by myself.I ran:show install all impact system bootflash:m9500-sf2ek9-mz.5.2.2d.bin kickstart m9500-sf2ek9-kickstart-mz.5.2.2d.binAnd returned:Compatibility check is done:Module boot...
It appears iSNS service is not available with NX-OS 5.2. I am on MDS 9222i with NX-OS 5.2. iSCSI Feature is enabled, but iSNS feature can't be enabled. mds9222i# show version...Software BIOS: version 1.0.12 loader: version N/A kickstart: v...
Hello , we have a 9124 (release 1.3.2.) and we need to activate NPIV . We use this switch with Falconstor software( NSS),2 server dell .We aren't able to work with Virtual ports of Cisco. Thanks Pasquale ---Posted by WebUser Pasquale Troisi from...
I'm trying to setup LDAP Authentication for our MDS 9509's running 5.2(2) without success, I followed the "Sec Version 5" document. When I try to login and run "Debug ldap all" (on another session) to capture what is happening I get success for most ...
Hi,it's my first experience in the fibre channel world and i have a few doubts about the best way to connect the nexus 5500 to a EMC storage.This is my scenariothis is my configuration:vsan database vsan 2 vsan 2 interface fc 1/1 vsan 3 vsan 3 interf...
Hi everyone could you help me i'm going to connect a ucs environment with FC to a Nexus 5548 and with FC from the Nexus to the NetApp Storage, i need some special licences in the Nexus 5K or with the Storage Protocols licence i can do that????My idea...
Hello All,The IT department is planning to change some HBA cards to some of our servers. The HBA cards manufacturer is HP AP770B - HP 82B PCIe 8Gb FC Dual Port HBA AJ763B - HP 82E 8Gb Dual-port PCI-e FC HBA QR559A - HP SN1000E 16Gb 2P FC HBA AJ764A...
DearsFailed to start PostgreSQL. A security software agent may be blocking PostgreSQL from installing.I disabled the Antivirus and disabled remote users on windows 2008 but still the sametried to install manually before and during Fabric manager but...
