Cisco 7000k fcoe card

henry.benjamin · ‎05-02-2012

Hi All

Anyone have the cisco 7000 fcoe card working, tac cannot help me new bug apparently

NXos-5.2(4)

Cisco ucs 1.4(3l)

cannot start services is the error ?

Licenses are installed on the root vdc and enabled for the module in slot 9

appreciate if anyone has any experience with this card.

cheers

Henry

Carlo Schmidt · ‎05-02-2012

Hi Henry,

Can you provide some more info on the issue? What are you configuring when you see this error?

Thanks!

Carlo

henry.benjamin · ‎05-02-2012

Following the guide however the fcoe service will not start in the storage vdc

see error below

Default_VDC_SW01-FCOE_SAN_NETAPP# [34D [J
Default_VDC_SW01-FCOE_SAN_NETAPP# sh vlan fcoe

Service not enabled

Default_VDC_SW01-FCOE_SAN_NETAPP# [34D [J
Default_VDC_SW01-FCOE_SAN_NETAPP# sh vlan fcoe

Service not enabled

Default_VDC_SW01-FCOE_SAN_NETAPP# [34D [J
Default_VDC_SW01-FCOE_SAN_NETAPP# sh vlan fcoe

Service not enabled

Carlo Schmidt · ‎05-03-2012

Have you installed the feature-set fcoe in the default vdc?

After doing this, the feature-set needs to be installed in the fcoe vdc.

Let me know if this worked. If not, you might have to include a bit more on your current config.

henry.benjamin · ‎05-03-2012

Hi Carlo,

installed the feature yes, but apparenely if you create the stoarge vdc first this breaks the install ?

Cheers

Henry

logs below

feature feature-set

Default_VDC_SW01# sh feature-set

Feature Set Name ID State

-------------------- -------- --------

fcoe 1 installed

fabricpath 2 uninstalled

fex 3 uninstalled

mpls 4 uninstalled

Default_VDC_SW01#

Carlo Schmidt · ‎05-03-2012

I would have to test this, not 100%. Can you include a 'show vdc' and a 'show feature-set' <-- from fcoe vdc

vdsudame · ‎05-08-2012

There are couple of bugs which we might be hitting, CSCty88696 and CSCtl66888. we are working on getting the release note populated for these issues as they are new issues which we have found wrt N7k FCoE.

Vin.