I am having 2 Cisco MDS 9216i for SAN replication. In one site the cisco 9216i is connected to Cisco 4506 Switch via Gigabitethernet and working fine. On other side I am not able to get the gigabitethernet up and running.It stucks in the initializing modem,so even layer 2 is not coming up. We are having Cisco 2950 and Cisco 3550 with gigbitethernet modules with LX and SX modules.Is it something to do with the Cisco Switch compatibility. Or some configuration needs to be done for low end switches.Also if I can get the list of Cisco switche compatabile with Cisco MDS 9216i for gigabitethernet connectivity.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...