02-18-2014 02:17 AM
Hello,
I am new to this switch. I want to setup SMTP alerts whenever a port failure / hardware issue happens on the switch. Kindly assist, how we can setup this.
Thanks
Solved! Go to Solution.
02-18-2014 05:15 AM
Hello,
I believe you are looking to configure Cisco Callhome.
You may use Cisco Fabric Manager to configure callhome, and here is a doc that talks about it step-by-step - http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sy
smgnt/fm/call.html The following link talks about configuring callhome, in detail, if you want to use the command line interface, instead - http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sy
smgnt/nxos/call.html#wp1393543 Here is an example - callhome contract-id <> customer-id <> switch-priority 2 email-contact <> phone-contact <> streetaddress <> destination-profile full_txt email-addr <> destination-profile short_txt email-addr <> destination-profile xml email-addr callhome@cisco.com no destination-profile full_txt alert-group all destination-profile full_txt alert-group environmental no destination-profile short_txt alert-group all destination-profile short_txt alert-group environmental transport email smtp-serverport 25 transport email from <> transport email reply-to <> enable no periodic-inventory notification periodic-inventory notification interval 30 Thanks, Arun
02-18-2014 05:15 AM
Hello,
I believe you are looking to configure Cisco Callhome.
You may use Cisco Fabric Manager to configure callhome, and here is a doc that talks about it step-by-step - http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sy
smgnt/fm/call.html The following link talks about configuring callhome, in detail, if you want to use the command line interface, instead - http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sy
smgnt/nxos/call.html#wp1393543 Here is an example - callhome contract-id <> customer-id <> switch-priority 2 email-contact <> phone-contact <> streetaddress <> destination-profile full_txt email-addr <> destination-profile short_txt email-addr <> destination-profile xml email-addr callhome@cisco.com no destination-profile full_txt alert-group all destination-profile full_txt alert-group environmental no destination-profile short_txt alert-group all destination-profile short_txt alert-group environmental transport email smtp-serverport 25 transport email from <> transport email reply-to <> enable no periodic-inventory notification periodic-inventory notification interval 30 Thanks, Arun
02-19-2014 04:49 AM
Thank you Arun. This is what did the trick for me
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: