Re: Cisco MDS Vsan for EVA8100 and EMC Clariion (Same or Seperat
I have been known to create VSAN's for individual production systems traffic. Eg, an absolute mission critical solution that is basically seperate itself and has no intereaction with anything else on the SAN could be put in a VSAN and kept seperate from other systems. I have had the unfortunate issue with some LSI based arrays that start spitting out errors for no apparent reason. Our VTL and the server it attaches too also sometimes spit out errors and therefore, I prefer to keep backup traffic completely seperate to other traffic.
Basically, do what you feel comfortable with. In reality, if you have no need for VSAN's, why buy a MDS?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...