Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Copy running-config startup-config fails

Hi

whenever we try to save the running config to the startup configuration it is failing both from GUI and CLI.

This is the error we are getting..

XYZ# copy running-config startup-config

2013 Nov 21 13:08:46 XYZ %ZONE-2-ZS_INIT_FAILED: Failed to save persistent configuration

2013 Nov 21 13:08:46 XYZ %ZONE-2-ZS_INIT_FAILED: pss_create failure, code = 0x80480011, URL = sync:/mnt/pss/zone_zs_active_zset_cfg

[########################################] 100%

2013 Nov 21 13:08:47 XYZ %SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.

Configuration update aborted: request was aborted

Any suggestions ?

1 REPLY
Cisco Employee

Copy running-config startup-config fails

Hi Hitesh,

The first thing to check is to determine if compact flash is mounted in ready only mode.

Please see the release note of  CSCeg75552 - EXT3-fs filesystem problem due to transient CompactFlash failure.

Best regards,

Jim

700
Views
0
Helpful
1
Replies
CreatePlease login to create content