We have Weblogic 8.1, Service Pack 5 and Cisco CSM running 4.2(1) code.
I have seen references that HTTP probe should be successful in testing HTTPS service (we do not have neither CSM-S or SSL module), however please see the message displayed on Weblogic server when it's configured this way:
<Jan 20, 2007 11:55:38 AM PST> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer 10.1.15.253 - 10.1.15.253 during SSL handshake.>
Obviously, server does not respond and CSM declares the VSERVER/Real as down.
Does anyone have an idea why this can be happening and if whether it's even possible to probe Weblogic's SSL interface with HTTP probe from CSM?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...