Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Defining Schedules on MDS9500

If I do not want to use CLI, is there an option using DM or FMS to define schedules & jobs on MDS9500?

If there is how do I navigate?

3 REPLIES
Cisco Employee

Re: Defining Schedules on MDS9500

The chart B1 in the Fabric Manager Configuration Guide located at:

http://cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/fm_4_1/fmguide.html

states that schedule configuration is not supported via Fabric or Device Manager.

So unfortunately the answer to your question is no, it is not supported via FM or DM, only CLI.

-Mike

Community Member

Re: Defining Schedules on MDS9500

Thanks.

Community Member

Re: Defining Schedules on MDS9500

You could create a text file of the schedule config you want and place it on a TFTP server. Then use FMS to copy the scheduler config file from the TFTP to running on each switch.

Works great. However if you want each scheduler to be unique it can be a bit more challenging to do this.

150
Views
0
Helpful
3
Replies
CreatePlease to create content