Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Fabric Manager 3.1(2b)

I upgraded to Fabric Manager 3.1(2b) from 2.0(2b). When I try to connect to Fabric Manager (either the app or the Web) it does not let me authenticate. I tried my CLI account and it does not work. I am still running an old version of FM off a server but need to get this fixed.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Fabric Manager 3.1(2b)

FM changed and so without a screenshot, I would suspect you are getting hung up at the new screen. So, you will select localhost, admin as the user and then password is the password. This will bring up another screen where you can proceed discover the IP address of the seed switch. Or if it's already there, select the radio button on the left and select the button for open.

1 REPLY
Cisco Employee

Re: Fabric Manager 3.1(2b)

FM changed and so without a screenshot, I would suspect you are getting hung up at the new screen. So, you will select localhost, admin as the user and then password is the password. This will bring up another screen where you can proceed discover the IP address of the seed switch. Or if it's already there, select the radio button on the left and select the button for open.

113
Views
0
Helpful
1
Replies