Fabric Manager : snmpd: Another copy operation in progress
I have actually a problem with Fabric Manager when trying to activate a zoneset in one of my MDS9513 switch.
I receive an error message saying : snmpd: Another copy operation in progress. Only one operation allowed at any instance
Our support recommand me to do a switch-over of the supervisor module, but my client quite on the nerve about this, and i would like to know if there is another way of getting this issue resolved without trying anything risky with the switch ?
Re: Fabric Manager : snmpd: Another copy operation in progress
When you attempt an activation from FM, after performing the activation FM does a copy of the running config to startup config. So in this case although your activation will go through successfully, but you will get this error when FM is trying to copy the configuration. This is purely cosemtic and doing a system switchover will not be the fix.
Are you using standalone FM or FM server ? I recommend you rediscover the Fabric and restart FM services.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...