I have Fabric Manager v4.1.1(b) and I've configured radius through ACS v4.2 when try to login into fabric manager web client y got the page http://IP_Fabric_Manager/home.do The logs from the ACS indicate a sucessfull authentication but the web page is empty. When i disable the radius configuration i can connect to the FM web client through the admin user
I only have this problem with the web client, i can connect to Fabric Manager server through the radius server
I am using RADIUS (Cisco IOS/PIX 6.0) at the ACS Network configuration and the user setup is configured with cisco-av-pair shell:roles*"network-admin"
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...