We are building a new server to run fabric manager. We currently have a server running
3.2.3 fabric manager and the fabric consists of 4 9509 switches. The A side fabric has one 9509 with an ISL to another 9509. The b side fabric is set up the same way. We are introducing two new 9513 switches one with an ISL to a fabric, the other with an ISL to the b fabric. Does it matter which switch we use for the seed server when setting up the new fabric manager?
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...