I attached a drawing to this post so you can see what I am trying to do.
The setup is server at the bottom with dual CNAs each going to separate 2232s. Server communication with the LUNs would be over FCoE. The storage itself up top goes straight into the 5548s using native FC because that is all it supports.
More info: 5ks running with storage license and on version 5.2.1
So, the question will the server be able to use this storage?
Any help finding a How To for this would be much appreciated.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...