Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

hardware failure

I have a port hardware failure on MDS9509, and it still exist after replacing the gbic,also disabling & enabling the port didn't help.

any advise?

2 REPLIES
Anonymous
N/A

Re: hardware failure

The possible causes may be:

1)Not enough port indexes are available.

2)Available port indexes are non-contiguous

3)Not enough power is available in the chassis

For more information regarding this issue refer the below URL:

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_hw2.html#wp86105

New Member

Re: hardware failure

Thanks, can you send me the information, as it prompts with an error on page when trying to open the link.

Oded.

425
Views
0
Helpful
2
Replies