I have experience with EMC storage arrays and McData/Brocade directors and switches...but, i'm lacking any knowledge of the MDS9000 series fiber directors and more specifically, the HDS storage arrays...
What software is used to manage the HDS storage...My background is with EMC, so, something that would equate to solutions enabler or ECC possibly???
I do know that ECC can manage HDS arrays but you probably are better off using the HDS tools. There are a number of them depending on the arrays. USP/USP V uses Storage Navigator. AMS2000 series uses SNM2. AMS1000's and 9500 series use SNM. The list goes on. There is a forum ( forums.hds.com ) that you can ask questions.
If you have HP Storage Essentials/HDS HSSM, you can manage the arrays and switches with it.. to a certain extent.
If you can use a Brocade switch, you can use Fabric Manager/Device Manager. The only problem is the Cisco offers so much more in some respects than Brocade but its something to learn and enjoy.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...