Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started.

New Member

How to add zones to zoneset

What is the command to add multiple zones to a zoneset?

  • Storage Networking
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How to add zones to zoneset

There are few ways- sample of one of it is below

From the cli,

9509# conf t

9509(config)# zone name cisco vsan 1

9509(config-zone)# member ?

domain-id Add member based on domain-id,port-number

fcalias Add fcalias to zone

fcid Add FCID member to zone

fwwn Add Fabric Port WWN member to zone

interface Add member based on interface

pwwn Add Port WWN member to zone

symbolic-nodename Add Symbolic Node Name member to zone

9509(config-zone)# member pwwn 01:11:11:11:11:11:11:11

9509(config-zone)# exit

9509(config)# zone name cisco1 vsan 1

9509(config-zone)# exit

9509(config)# zoneset name test vsan 1

9509(config-zoneset)# member cisco

9509(config-zoneset)# member cisco1

9509(config-zoneset)# exit

9509(config)# exit

9509# sh zone

zone zoneset

9509# sh zoneset

zoneset name test vsan 1

zone name cisco vsan 1

pwwn 01:11:11:11:11:11:11:11

zone name cisco1 vsan 1

9509#

You can also use Fabric Manager to create and add zoneset. Also you have to activate the zoneseat to be effective...

Here is the URL for your ref..for software rel. 1.2.1

http://www.cisco.com/univercd/cc/td/doc/product/sn5000/mds9000/1_2/sw_confg/zonecnfg.htm#24151

Hope this helps..

3 REPLIES
Cisco Employee

Re: How to add zones to zoneset

What platform you are looking for to add zones to zoneset.... MDS or SN series..

New Member

Re: How to add zones to zoneset

Adding zones to zonesets on an MDS 9216.

Cisco Employee

Re: How to add zones to zoneset

There are few ways- sample of one of it is below

From the cli,

9509# conf t

9509(config)# zone name cisco vsan 1

9509(config-zone)# member ?

domain-id Add member based on domain-id,port-number

fcalias Add fcalias to zone

fcid Add FCID member to zone

fwwn Add Fabric Port WWN member to zone

interface Add member based on interface

pwwn Add Port WWN member to zone

symbolic-nodename Add Symbolic Node Name member to zone

9509(config-zone)# member pwwn 01:11:11:11:11:11:11:11

9509(config-zone)# exit

9509(config)# zone name cisco1 vsan 1

9509(config-zone)# exit

9509(config)# zoneset name test vsan 1

9509(config-zoneset)# member cisco

9509(config-zoneset)# member cisco1

9509(config-zoneset)# exit

9509(config)# exit

9509# sh zone

zone zoneset

9509# sh zoneset

zoneset name test vsan 1

zone name cisco vsan 1

pwwn 01:11:11:11:11:11:11:11

zone name cisco1 vsan 1

9509#

You can also use Fabric Manager to create and add zoneset. Also you have to activate the zoneseat to be effective...

Here is the URL for your ref..for software rel. 1.2.1

http://www.cisco.com/univercd/cc/td/doc/product/sn5000/mds9000/1_2/sw_confg/zonecnfg.htm#24151

Hope this helps..

1599
Views
0
Helpful
3
Replies