One more thing.... I dont want the erase the management IP address , rest everything should revert to factory default, because i am doing it remotely i need to login... is there any way to accomplish this.
if you don't want to erase every thing, what you can do is, open you configuration with notepad and put "no" in front of the configuration line. and then paste it to the switch under configuration mode
This document covers the important troubleshooting data to be collected and data collection procedures when you experience an issue with ACI fabric. The collection of the relevant troubleshooting data is very critical to root cause the issue and...
There are certain situations in where an On-Demand Techsupport is not able to be performed. In such cases, a local techsupport can be collected instead for either the APIC or an ACI switch. This document outlines this...
Webcast: Evolution of Data Center: From Classic Ethernet to VXLAN
(Live Webcast Tuesday May 15, 2018 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
Register today for this live Cisco Support Community webcast.