Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

How to factory default cisco MDS 9222i

How to factory default cisco MDS 9222i

4 REPLIES
Highlighted
Cisco Employee

How to factory default cisco MDS 9222i

Hi,

write erase

write erase boot

reload

(If prompted to save run to start, say no)

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/bb.html#wp1087208

Regards,

David

New Member

How to factory default cisco MDS 9222i

Hi, Thanks for response...

One more thing.... I dont want the erase the management IP address , rest everything should revert to factory default, because i am doing it remotely i need to login... is there any way to accomplish this.

Thanks

Abhilash

New Member

How to factory default cisco MDS 9222i

If I do "write erase" whether this will erase the username / password also...

Cisco Employee

How to factory default cisco MDS 9222i

it will erase your password.

if you don't want to erase every thing, what you can do is, open  you configuration with notepad and put "no" in front of the  configuration line. and then paste it to the switch under configuration mode

3460
Views
5
Helpful
4
Replies
CreatePlease to create content