One more thing.... I dont want the erase the management IP address , rest everything should revert to factory default, because i am doing it remotely i need to login... is there any way to accomplish this.
if you don't want to erase every thing, what you can do is, open you configuration with notepad and put "no" in front of the configuration line. and then paste it to the switch under configuration mode
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...