I want to do read-only zoning with an IVR zone. There's no simple read-only checkbox for IVR zones in Fabric Manager. The only good reference I can find to this is in the 1.3 Fabric Manager Configuration Guide:
"LUN-zoning and read-only zoning can be used between members of active IVR zones. To configure this service, you need to create and activate LUN-zones and/or read-only zones between the desired IVZ members in all relevant edge VSANs using the zoning interface. The LUN zoning and read-only zoning features cannot be configured in a IVZS setup."
This is a little ambiguous. Am I to believe that I need to go in and manually create "ivrz" zones and make them read-only? I'm hesitant to do this since IVR documentation commonly states "Do not create a zone with prefix `IVRZ' or a zone set with name `nozonset'."
