I'm currently using an MDS 9216. I've configured a Cisco Secure ACS 3.1 (Access Control Server) for AAA authentication and accounting.
ACS works fine authenticating users accessing the switch using Telnet. However, users accessing the switch using the Device Manager don't seem to be authenticated by ACS and still need their username to be created by running the following command on MDS:
snmp-server user admin network-admin auth ...
Is there something I'm missing here. Is it possible to authenticate the Device Manager users using ACS?
Looks like this issue has been kicked around within the Cisco email archives the past few days. Short answer is no, the ACS cannot be used for the SNMP V3 on the MDS. Looks like there will be help coming in MDS release 2.0 Please talk to your local Cisco SE on this.
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...
RBAC users like firstname.lastname@example.org may fail HX Connect login. At that time, "Incorrect user name or password(100005)" is shown as a failure reason.
RBAC users can login to vCenter server. So, RBAC username and passwo...