Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MDS 9124 error message fc-4 types not registered

I have added an IBM AIX host to our SAN and cannot get it to see the NetApp array. I can fcping the host and flogi database looks correct. Zone is configured correctly.  If I run a sh fcns internal reject-log vsan 10 I get the below error but cannot find any documentation as to what it is caused by.  Anyone know what is causing the issue?

sh fcns internal reject-log vsan 10

VSAN:10    FCID:0x650900
------------------------
Command                     :NS_CMD_GID_FT
Reject Reason               :unable to perform command
Reject Reason Explanation   :fc-4 types not registered
Time                        :Wed Apr 14 13:57:42 2010

Config info is as follows:

fcsw2com4# sh flogi data
---------------------------------------------------------------------------
INTERFACE  VSAN    FCID            PORT NAME               NODE NAME      
---------------------------------------------------------------------------
fc1/1      10    0x650200  10:00:00:00:c9:60:16:7b  20:00:00:00:c9:60:16:7b    
fc1/2      10    0x650300  10:00:00:00:c9:60:39:2e  20:00:00:00:c9:60:39:2e    
fc1/3      10    0x650000  50:0a:09:82:96:d8:25:f0  50:0a:09:80:86:d8:25:f0    
fc1/4      10    0x650100  50:0a:09:82:86:d8:25:f0  50:0a:09:80:86:d8:25:f0    
fc1/5      10    0x650800  10:00:00:00:c9:4c:7d:46  20:00:00:00:c9:4c:7d:46    
fc1/6      10    0x650900  10:00:00:00:c9:66:c0:ab  20:00:00:00:c9:66:c0:ab  <<< this is the new device  
fc1/7      10    0x650600  10:00:00:00:c9:7d:34:9c  20:00:00:00:c9:7d:34:9c    
fc1/8      10    0x650500  10:00:00:00:c9:7d:39:7e  20:00:00:00:c9:7d:39:7e   

Total number of flogi = 8.

fcsw2com4# sh fcalias
fcalias name SRV_p510_ap vsan 10
  pwwn 10:00:00:00:c9:7d:34:9c

fcalias name SRV_p510_db vsan 10
  pwwn 10:00:00:00:c9:7d:39:7e

fcalias name SRV_p550b vsan 10   <<< this is the new device
  pwwn 10:00:00:00:c9:66:c0:ab

fcalias name SRV_vios1 vsan 10
  pwwn 10:00:00:00:c9:60:16:7b
  pwwn 10:00:00:00:c9:60:39:2e

fcalias name STO_lvtlarsa01_1b vsan 10
  pwwn 50:0a:09:82:96:d8:25:f0

fcalias name STO_lvtlarsa02_1b vsan 10
  pwwn 50:0a:09:82:86:d8:25:f0

fcalias name p510_netbackup vsan 10
  pwwn 10:00:00:00:c9:4c:7d:46

fcsw2com4# sh zone
zone name ZNE_vios1 vsan 10
  fcalias name STO_lvtlarsa01_1b vsan 10
    pwwn 50:0a:09:82:96:d8:25:f0
 
  fcalias name STO_lvtlarsa02_1b vsan 10
    pwwn 50:0a:09:82:86:d8:25:f0
 
  fcalias name SRV_vios1 vsan 10
    pwwn 10:00:00:00:c9:60:16:7b
    pwwn 10:00:00:00:c9:60:39:2e
 
  fcalias name SRV_p510_ap vsan 10
    pwwn 10:00:00:00:c9:7d:34:9c
 
  fcalias name SRV_p510_db vsan 10
    pwwn 10:00:00:00:c9:7d:39:7e
 
  fcalias name p510_netbackup vsan 10
    pwwn 10:00:00:00:c9:4c:7d:46
 
  fcalias name SRV_p550b vsan 10
    pwwn 10:00:00:00:c9:66:c0:ab

fcsw2com4# sh zoneset
zoneset name PROD_B vsan 10
  zone name ZNE_vios1 vsan 10
    fcalias name STO_lvtlarsa01_1b vsan 10
      pwwn 50:0a:09:82:96:d8:25:f0
   
    fcalias name STO_lvtlarsa02_1b vsan 10
      pwwn 50:0a:09:82:86:d8:25:f0
   
    fcalias name SRV_vios1 vsan 10
      pwwn 10:00:00:00:c9:60:16:7b
      pwwn 10:00:00:00:c9:60:39:2e
   
    fcalias name SRV_p510_ap vsan 10
      pwwn 10:00:00:00:c9:7d:34:9c
   
    fcalias name SRV_p510_db vsan 10
      pwwn 10:00:00:00:c9:7d:39:7e
   
    fcalias name p510_netbackup vsan 10
      pwwn 10:00:00:00:c9:4c:7d:46

   
    fcalias name SRV_p550b vsan 10
      pwwn 10:00:00:00:c9:66:c0:ab

fcsw2com4# sh zoneset active
zoneset name PROD_B vsan 10
  zone name ZNE_vios1 vsan 10
  * fcid 0x650000 [pwwn 50:0a:09:82:96:d8:25:f0]
  * fcid 0x650100 [pwwn 50:0a:09:82:86:d8:25:f0]
  * fcid 0x650200 [pwwn 10:00:00:00:c9:60:16:7b]
  * fcid 0x650300 [pwwn 10:00:00:00:c9:60:39:2e]

2 REPLIES
New Member

Re: MDS 9124 error message fc-4 types not registered

Also note I am running:

Software
  BIOS:      version 1.0.0
  kickstart: version 3.1(2)
  system:    version 3.1(2)

  BIOS compile time:       10/04/06
  kickstart image file is: bootflash:/m9100-s2ek9-kickstart-mz.3.1.2.bin
  kickstart compile time:  1/18/2007 7:00:00 [02/04/2007 09:27:18]
  system image file is:    bootflash:/m9100-s2ek9-mz.3.1.2.bin
  system compile time:     1/18/2007 7:00:00 [02/04/2007 09:44:36]


Hardware
  cisco MDS 9124 ("1/2/4 Gbps FC/Supervisor-2")
  Motorola, e500 with 515056 kB of memory.

Silver

Re: MDS 9124 error message fc-4 types not registered

is there a reason you have one zone for all of the systems ? It's considered best practice to have either single initiator - single target zoning or single initiator - multiple targets

Once you have zone your AIX box to the NetApp unit, run "cfgmrg". Typically that will force the system login to the array.

@dynamoxxx
847
Views
0
Helpful
2
Replies