[MDS 9124] fcalias database erased after migration
Strange issue I faced during a migration last week : I had to introduce a new switch into a fabric, everything went fine.
At some point I had to clean all the "full zone sets" (in order to refresh the local database with the active zoneset), at the end of the migration, the customer told me that all the fcalias defined in the configs were dropped; is it a side effect of the "clear zone database vsan xxx" ?
If this is the case, It's not documented. Any idea ?
Re: [MDS 9124] fcalias database erased after migration
for some unknown reasons, the full zone sets were not identical across the whole fabric (some switches having old zonesets in the configuration), I just wanted to check all switches, delete the full zone set locally and replace it with the active zoneset which is by definition always up to date (this is not my san, I only had to perform the migration)
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...