cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
969
Views
0
Helpful
4
Replies

MDS 9124 rebooted...

kiran.sn
Level 1
Level 1

MDS switch rebooted with the following FATAL error.

show system reset-reason

Reason: Reset Requested due to Fatal Module Error

Service: OHMS daemon

Version: 3.1(2)

show module internal exceptionlog

exception information --- exception instance 1 ----

Module Slot Number: 1

Device Id : 0

Device Name : undef

Device Errorcode : 0x4073001d

Device ID : 07 (0x07)

Device Instance : 48 (0x30)

Dev Type (HW/SW) : 00 (0x00)

ErrNum (devInfo) : 29 (0x1d)

System Errorcode : 0x4073002a System Health failure

Error Type : FATAL error

PhyPortLayer : Management

Port(s) Affected : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24

Error Description :

DSAP : 0 (0x0)

UUID : 0 (0x0)

Any input please..

4 Replies 4

KevinBeaulieu
Level 1
Level 1

How long was the switch up before it reset?

I am not sure about how long the switch was ON but as I remember, it was a new setup. So uptime can not be more that 2-3 Months.

Ok. It doesn't sound like the 497 day issue. Were there any core files or anything else in the logs? Was a case opened with Cisco support?

Also as this is Gen 2 switch, it doesn't sound like the know OHMS bug either. I'd recommend a case with Cisco support.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: