08-24-2009 06:54 AM
I am brand new to the fabric switch world and until now have only had experience with ethernet switches. I take care of the network infrastructure where I work and have been tasked with documenting a backup/recovery procedure for our fabric switches the same way we have it for our ethernet switches.
I have noticed that the SAN-OS images are much bigger than IOS so it made sense why SAN-OS wouldn't allow xmodem transfers. With that though, comes the problem of how to recover SAN-OS. I searched around for documentation on this and haven't been able to find anything. I was just wondering if anybody can point me to a doc on how to restore SAN-OS from rommon or whatever it is called on these switches. I would also like to know what the escape sequence to get into rommon is if it exists on these switches.
Thanks
Solved! Go to Solution.
08-24-2009 07:33 AM
Hello Joe,
these two links should help you:
If you have any additional questions, feel free to ask.
Regards,
Roman
08-24-2009 07:33 AM
Hello Joe,
these two links should help you:
If you have any additional questions, feel free to ask.
Regards,
Roman
08-24-2009 07:42 AM
Exactly what I was looking for. Thank you much.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: