I'v connected a single port on a MDS 9222i to a single "external" port on a Qlogic FC Pass-thru module. The MDS 9222i has negotiated the link as mode FX. Additionally, the Qlogic pass-thru module has 14 "internal" ports that are mapped to individual IBM Blade server HBAs.
I do not see any of the IBM Blade server HBAs on my fabric (e.g., no FLOGI)? Would enabling NPIV on the MDS 9222i resolve the issue? Can NPIV be enabled on the single MDS port that connects to Qlogic pass-thru port? Can you provide the recommended steps to enable NPIV?
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...