Looks like the mgmt interface has been bouncing up & down since Sept. What is this attached to? What does that log say? Is the duplex and speed the same on both sides? Can you replace the cable? Does the show interface mgmt 0 show increasing CRC and/or output errors? These are the things to look for. Try a new cable as it's the easiest and most probable issue.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...