I just was wondering if there is any way to route all services of catalyst650 and MCdata through mds 9513 from one site to another on 40 km along, without changing the ip address of the vlan in the catalyst, i know the easiest way to do this is connecting the catalyst to the oadm but i dont know if there is anyway to use mds9513 as it was an oadm? or I´m not sure if is possible install in the 9513 a line card MSM 18/4, conect the catalyst in this module and send the infromation through the MDS 9513 with CDWM to the other site? is there some installation guide to do this ?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...