I am looking to see if there is a CLI command for MDS 9124 running NX-OS that will dispaly all the ports and show me if there are any errors on them whether they are bad cables or such. I need a command that will show me loss of sync or maybe SFP errors.
I am more of a brocade guy and they have a command called "porterrshow" that will do that.
I am having some issues with ESX boxes that keep losing connection to the switches. They show up in connectivity manager (CX4-240)as not logged in. Well let me say that some of the intiators for a single host will show up as not logged in and the others are just fine.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...