cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1328
Views
0
Helpful
3
Replies

MDS FC Port mode for UCS connectivity

kisankagr
Level 1
Level 1

Hi,

A little question on admin mode of the MDS switch port which is connected to a UCS Fabric Interconnect.

The switch is a MDS 9509 running SAN OS v3.3, we have enabled NPIV on the MDS switch. Currently the port's admin mode is 'auto' and its operational mode is 'F'.

Therefore is it safe to change the admin mode to 'F' or is it better to keep 'auto' as it is.

Cheers,

Kisanka

1 Accepted Solution

Accepted Solutions

Jeremy Waldrop
Level 4
Level 4

You can leave it set to auto, F mode is the correct operational mode for UCS FIs.

View solution in original post

3 Replies 3

Jeremy Waldrop
Level 4
Level 4

You can leave it set to auto, F mode is the correct operational mode for UCS FIs.

Thanks Jeramy. Since the final operational mode is F, is it safe to administratively set the mode to 'F'

Yes, that is fine

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: